China Kaitian Brand SD90-C5 Hydraulic Track Dozer Bulldozer Crawler Bulldozer with Blade for Wholesale

• After-sales Service: Provided
• Warranty: Provided
• Type: Special Type
• Transmission: Hydraulic Transmission
• Walking Mode: Crawler
• Load and Unload Method: Front Discharge
• Model NO.: SD90-C5
• Engine Power: 147~515kw
• Certification: CE
• Condition: New
• Color: Yellow
• Working Mass (Kg): 106260
• Specific Pressure to Ground (Kpa): 143.7
• Track Center Distance (mm): 2770
• Track Shoe Width (mm): 710
• Grounding Length (mm): 4520
• Transport Package: 40hq Container
• Specification: 106260KG
• Trademark: KAITIAN
• Origin: China
• Production Capacity: 2000sets/ Year

Product Description

China KAITIAN Brand SD90-C5 Hydraulic Track Dozer Bulldozer Crawler Bulldozer With Blade For Wholesale 
>> Introduction

The SD90-C5 pure electric bulldozer adopts pure electric drive, energy saving and environmental protection, strong power, high production efficiency, high reliability, small turning radius, and low use cost. The working device of the equipment is flexible to operate, the cab has a wide field of vision, good comfort, can adapt to the working environment with high environmental protection requirements, and is convenient to maintain.
It is mainly used for working conditions in small sites such as power plants, coal mines, steel mills, etc., and is suitable for pushing, stacking, backfilling and other operations of loose materials.

>> Characteristic
>>Pure electric drive, zero emission, energy saving and environmental protection.
>>Equipped with large-capacity lithium iron phosphate power battery,
>>The wheel-side direct drive system applies load adaptive control technology, with fast power output response and strong explosive power, strong power at high speed, and the overall operating efficiency is improved by more than 10%.
>>Equipped with a highly sealed cab, the driver's ear noise is less than 75dB, greatly improving driving comfort; Compared with traditional fuel equipment, the overall use cost is reduced by more than 60%.
>>The battery and motor adopt intelligent temperature control system to realize efficient cooling of the power battery, drive motor and controller.
>>The high-voltage system adopts three-level safety protection to ensure safety; it is equipped with a 7-inch high-definition display and has a friendly human-computer interaction interface.

Strong power, high efficiency and energy-saving, and low maintenance cost. The rated power reaches 105kW, featuring high torque reserve coefficient. The improved air filter and intake and exhaust system guarantee up to 99% filtration accuracy to effectively prolong the engine life.

One-piece molding, not easy tobreak,The oil pipe is on the insideof the boom. Reinforced forearm design improves structure, disperses stress, stability and durability.

Simple operation mode,convenient maintenance,perfect technical supportand high reliability, highquality price-performanceratio and low use cost.

The curves of drive system and engine are perfectly matched to achieve more extensive high-efficiency zone and higher transmission efficiency. Self-made drive system features stable performance and reliable quality and has been long proved by the market.

The environmental sanitation blade, ripper, and universal blade can be installed depending on specific working condition to achieve strong working adaptability.

The machine adopts electronically controlled hydrostatic drive system to achieve good load self-adaptability, loaded and pivot steering capability, stepless speed regulation, and high flexibility and efficiency and realize outstanding construction performance in narrow sites.

>> Certification

SD90-C5
Working mass (kg)	106260	Track shoe width (mm)	710
Specific pressure to ground (kPa)	143.7	Grounding length (mm)	4520
Engine model	QST30	Fuel tank (L)	1638
Rated power/rated speed (kW/rpm)	708/2100	Blade type	Half U-shovel
Overall dimension (mm)	11500*5265*4590	Shovel depth (mm)	1010
Forward speed (km/h)	3.6/6.6/11.5	Type of scarifier	one
Backward speed (km/h)	4.4/7.8/13.5	Loosening depth (mm)	1670
Track center distance (mm)	2770

>> Production Process
>> Package & Delivery
>> Service

>> Pre-sale service Acting as a good adviser, our well-trained sales groups and professional technical team propose most rational solutions for our valued client as per practical project requirement. >> Select suitable model & matched equipment. >> Strong technical support. Reply clients' questions within 24 hours.

>> Service During Sales We have responsible team from raw material to finished products, and guarantee 100% pass rate. >> Design and manufacture products basis of client's special requirement >> Inspect each machine & matched accessories strictly before delivery >> Timely inform client of production progress.

>> After Sales Service We're always with you in after-sale service. >> We can arrange related after-sales representatives for debugging and training at worksite when starting up.  >> E-mail, call or door-to-door service in later using.

>> Overseas Project
>> Exhibition
>> About KAITIAN

Beijing Jincheng Mining Technology Co.,Ltd(JCDRILL) provide users high quality Mining & Drilling solutions,we always focus on the strategic conception of "Survival by quality, Development by credit''.

 

We have specilized in research, development and produce of rock blasting drilling rig, water well drilling rig, diamond core drilling rig, anchor drilling rig, and relative accessories & drilling services. constantly provide professional drilling solutions for all customers with our advanced technology, excellent equipment, strict testing means and good service network,which establish our brand "JCDRILL" a good image of market, now,we products account for 50% of domestic market and have been export to more than 40 countries, and we awarded ISO9001: 2000 in November, 2002.

 

With excellent technology and solid market service capabilities, we have both a sound marketing system and excellent service support system, which help us win confidence of customers both at home and abroad,we can provide drilling rig users with high quality professional air compressor solution and relative after-sales service also.

>> Certification

>> FAQ

Q: Are you original manufacturer?	Q: Which payment terms are available to us?	Q: Which Incoterms 2010 terms can we work?
A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have the whole series products you need.	A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70%  balance shall be settled before shipment. On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.	A: We JCDRILL are a professional and international company, accept all Incoterms 2010 terms, normally we work on FOB, CIF, CFR, CIP.
Q: How long will the delivery time take?	Q: How about after sales service?	Q:Spare Parts When You Need Them
A: Normally products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.	A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays, in line with our policy of always providing "a response within 15 minutes and job completion within 24 hours."	A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare parts will be delivered within 72 hours or no more than one week.

>> Related Products