China Construction Equipment Motorized Road Motor Grader

Product Details
Customization: Available
After-sales Service: Provided
Warranty: Provided
Diamond Member Since 2018

Suppliers with verified business licenses

Registered Capital
5000000 RMB
Plant Area
>2000 square meters
  • China Construction Equipment Motorized Road Motor Grader
  • China Construction Equipment Motorized Road Motor Grader
  • China Construction Equipment Motorized Road Motor Grader
  • China Construction Equipment Motorized Road Motor Grader
  • China Construction Equipment Motorized Road Motor Grader
  • China Construction Equipment Motorized Road Motor Grader
Find Similar Products

Basic Info.

Model NO.
GR135
Certification
CE
Condition
New
Application
Railway, Mine, Farmland, Highway
Transmission
Hydraulic - Mechanical
Walking Mode
Wheeled
Type
Small Grader
Total Weight (Standard)
11000kg
Reverse Speed
5,13,30km/H
Space of Front and Rear Axles
5780 mm
Maximum Lift Height
410mm
Tire Inflation Pressure
300kpa
Tread
2020mm
Transport Package
40hq Container
Specification
8015X2380X3050
Trademark
KAITIAN
Origin
China
Production Capacity
2000sets/ Year

Product Description

China Construction Equipment Motorized Road  Motor Grader
>> Introduction
The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm-lands etc
China Construction Equipment Motorized Road Motor Grader>> Characteristic
>> GR135 adopt  turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.
>>Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmission box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.
>>The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.
>>  The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.
>>The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.
China Construction Equipment Motorized Road Motor Grader
Energy-saving and environment-friendly engine, large-diameter fan and large air volume can better ensure the continuous and stable operation of the machine. Key components are imported products.
For example, the hydraulic components of EATN, HUSCO, HYDROCONTROL, MICO and other companies and makes the Hydraulic system stable and reliable
The cab design fully considers the comfort of all the driver's movements during construction and the convenience of daily use

China Construction Equipment Motorized Road Motor Grader

The hydraulic steering system of load sensing, steering priority and energy-saving type is adopted, and the steering of the whole machine is flexible in coordination with the connecting frame. The blade sliding adopts a multi-directional adjustable double-stroke mechanism, and the blade adopts a straight plate type high-strength wear-resistant material, and the two sides can be changed and used to improve the service life. The change of shovel angle is controlled by oil cylinder and has good balance. The cutting angle of shovel can be adjusted according to different soil quality. The machine uses a ball-bearing rotary mechanism and frictionless worm gearbox to ensure reliable operation and good service life

China Construction Equipment Motorized Road Motor Grader

>> Certification
Item GR135  
Basic parameters Engine model 6BT5.9-C130-II
Rated power/speed 97(2200r/min)
Overall dimension (standard) 8015X2380X3050
Total weight (standard) 11000kg
Tire specification 13.00-24
Ground clearance (front axle) 515mm
Tread 2020mm
Space of front and rear axles 5780 mm
Performance parameters Forward velocity 5,8,13,20,30,42km/h
Reverse speed 5,13,30km/h
Tractive effort f=0.75 61.3kN
Maximum gradeability 0.2
Tire inflation pressure 300kPa
Working system pressure 16MPa
Transmission pressure 1.3-1.8Mpa
Working parameters Maximum steering angle of front wheel ±49°
Maximum slant angle of front wheel ±17°
Maximum oscillating angle of front axle ±15°
Maximum oscillating angle of equilibrium box ±16°
Maximum steering angle of frame ±27°
Minimum turning radius 6.6m
Scrape knife Maximum lift height 410mm
Maximum cutting depth 515mm
Maximum tilt angle 90°
Cutting angle 54°-90°
Angle of revolution 360°
Length & chord height 3660x610mm
>> Production Process
China Construction Equipment Motorized Road Motor Grader>> Package & Delivery
China Construction Equipment Motorized Road Motor Grader>> ServiceChina Construction Equipment Motorized Road Motor Grader


>> Pre-sale service

Acting as a good adviser, our well-trained sales groups and professional technical team propose most rational solutions for our valued client as per practical project requirement.

>> Select suitable model & matched equipment.

>> Strong technical support. Reply clients' questions within 24 hours.
 


>> Service During Sales

We have responsible team from raw material to finished products, and guarantee 100% pass rate.

>> Design and manufacture products basis of client's special requirement

>> Inspect each machine & matched accessories strictly before delivery

>> Timely inform client of production progress.
 


>> After Sales Service

We're always with you in after-sale service.

>> We can arrange related after-sales representatives for debugging and training at worksite when starting up. 

>> E-mail, call or door-to-door service in later using.


 

China Construction Equipment Motorized Road Motor Grader>> Overseas Project
China Construction Equipment Motorized Road Motor Grader
>> Exhibition
China Construction Equipment Motorized Road Motor Grader
>> About KAITIAN
China Construction Equipment Motorized Road Motor GraderChina Construction Equipment Motorized Road Motor Grader
Beijing Jincheng Mining Technology Co.,Ltd(JCDRILL) provide users high quality Mining & Drilling solutions,we always focus on the strategic conception of "Survival by quality, Development by credit''.
 
We have specilized in research, development and produce of rock blasting drilling rig, water well drilling rig, diamond core drilling rig, anchor drilling rig, and relative accessories & drilling services. constantly provide professional drilling solutions for all customers with our advanced technology, excellent equipment, strict testing means and good service network,which establish our brand "JCDRILL" a good image of market, now,we products account for 50% of domestic market and have been export to more than 40 countries, and we awarded ISO9001: 2000 in November, 2002.
 
With excellent technology and solid market service capabilities, we have both a sound marketing system and excellent service support system, which help us win confidence of customers both at home and abroad,we can provide drilling rig users with high quality professional air compressor solution and relative after-sales service also.
China Construction Equipment Motorized Road Motor Grader>> Certification
China Construction Equipment Motorized Road Motor Grader

>> FAQ

Q: Are you original manufacturer?

 

Q: Which payment terms are available to us?
 
Q: Which Incoterms 2010 terms can we work?

A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have the whole series products you need. 

A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70%  balance shall be settled before shipment. On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.

A: We JCDRILL are a professional and international company, accept all Incoterms 2010 terms, normally we work on FOB, CIF, CFR, CIP.

Q: How long will the delivery time take? Q: How about after sales service?
 
Q:Spare Parts When You Need Them
 

A: Normally products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.

A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays, in line with our policy of always providing "a response within 15 minutes and job completion within 24 hours."

A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare parts will be delivered within 72 hours or no more than one week. 

>> Related Products
China Construction Equipment Motorized Road Motor Grader

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier